Full Text (PDF)
Original Article

Distribution Uniformity and Uniformity Coefficient of Selected Microsprinklers

R.D. Bansod , R.D. Bansod

Author Information

Licence:




Indian Journal of Waste Management 2(2):p 45-47, July-December 2018. | DOI:

How Cite This Article:


Timeline

Received : N/A         Accepted : N/A          Published : N/A

Abstract

 Five different types of microsprinklers were selected for identification as M-1, M-11, M-111, M-IV and M-V) for studying the Merrium and Keller Distribution Uniformity (DU) and Christiansen’s Uniformity Coefficient (UCC). The DU and UCC were studied at different spacing of microsprinkles and different pressures. The pressures were in the range of 1.0 to 2.0 kg/cm2 with and increment of 0.5 kg/cm2 and the spacings between microspinklers were 3 x 3 m to 10 x 10 m with an increment of 1.0 m (i.e. 3 x 3 m, 4 x 4 m ….., 10 x 10.0 m). The M-V has shown maximum UCC, 94.74 percent at 2 kg/cm2 pressure at the psacing of 3 x 3 m., and the lowest by M-IV i.e. 87.52 percent. More than desired value (70%) of UCC was reported only for MS-I for all pressures under consideration and for spacings 3 m x 3 m to 7 m x 7 m which indicates its superiority over other types of microsprinklers. The highest value of DU, 96.90 percent was recorded for M-II at 2.0 kg/cm2.

Keywords: Distribution uniformity; Microsprinkler spacings; Uniformity coeffieicnet.


References

No records found.


About this article


Cite this article


Licence:




Received Accepted Published
N/A N/A N/A

DOI:

Keywords


Article Level Metrics

Last Updated

Sunday 21 June 2026, 21:07:04 (IST)


297

Accesses

4
57
00

Citations


NA
NA
NA

Download citation


Article Keywords


Keyword Highlighting

Highlight selected keywords in the article text.


Timeline


Received N/A
Accepted N/A
Published N/A

licence



Access this article



Share