Abstract

Even though the GIC has undergone many advances, its chemistry is fundamentally different from that of modern resin based composite direct filling products, which feature a silica or glass particle filled polymer matrix that enhances repair retention. When the restoration is etched or air abraded after the tooth has been conditioned with an adhesive resin and etched, retention becomes "micromechanical," ensuring the resin cement's high tensile strength. Cementation of the extraoral fabricated restoration is very important for the longevity of the restoration. The bond strength of resin cement to ceramic and fibre post is better than conventional cements. This article discusses about the various types of resin cements and there uses for luting indirect restorations such crowns, veneers, inlays, and onlays, etc.

• 1.   Kameyama, A., Bonroy, K., Elsen, C., Lührs, A.-K., Suyama, Y., Peumans, M., Van Meerbeek, B., & De Munck, J. (2015). Luting of CAD/CAM ceramic inlays: Direct composite versus dual-cure luting cement. Bio-Medical Materials and Engineering, 25(3), 279–288.
• 2.   Sakaguchi, R. L., Ferracane, J., & Powers, J. M. (2019). Craig’s restorative dental materials. Elsevier.
• 3.   Resin cement selection for different types of fixed partial coverage restorations: A narrative systematic review, S Ghodsi, M Shekarian, M Mostafa Aghamohseni, S Rasaeipour, S Arzani, Clin Exp Dent Res. 2023;1–16.
• 4.   Kurklu D, Azer SS, Yilmaz B, et al. Porcelain thick-ness and cement shade effects on the colour andtranslucency of porcelain veneering materials. JDent. 2013;41(11):1043–1050.
• 5.   Magalhaes APR, Cardoso P. d C, de Souza JB, et al. Influence of activation mode of resin cement on the shade of porcelain veneers. J Prosthodont. 2014;23(4):291–295.
• 6.   Influence of Resin Cements on Color Stability of Different Ceramic Systems. M Hoorizada, S Valizadehb, c, H Heshmatd, S F Tabatabaeid, T Shakeri, Biomaterial Investigations in Dentistry 2021, Vol. 8, NO. 1, 11–17.
• 7.   Adhesion to Zirconia: A Systematic Review of Surface Pretreatments and Resin Cements, Rubén Comino-Garayoa, Jesús Peláez, Celia Tobar, Verónica Rodríguez, María Jesús Suárez, Materials 14(11):2751. 8. Burgess JO, Ghuman T, Cakir D. Self-adhesive resin cements. J Esthet Restor Dent. 2010;22(6):412- 419.
• 9.   Dental Resin Cements—The Influence of Water Sorption on Contraction Stress Changes and Hydroscopic Expansion, G. Sokolowski, Agata Szczesio, K. Bociong, Karolina Kaluzinska, Barbara Lapinska, J. Sokolowski, M. Domarecka, M. Lukomska-Szymanska, Materials 2018, 11, 973; doi:10.3390/ma11060973.
• 10.   Magne P. Immediate dentin sealing: A fundamental procedure for indirect bonded restorations. J Esthet Restor Dent 2005;17:144–154.
• 11.   Breschi L, Mazzoni A, Ruggeri A, Cadenaro M, Di Lenarda R, DeStefano Dorigo E. Dental adhesion review: Aging and stability of the bonded interface. Dent Mater 2008;24:90–101.
• 12.   Duarte S Jr, de Freitas CR, Saad JR, Sadan A. The effect of immediate dentin sealing on the marginal adaptation and bond strengths of total-etch and self-etch adhesives. J Prosthet Dent 2009;102:1–9.
• 13.   Duarte S Jr, Phark J, Botta AC, Avishai A, Hernandez A, Sadan A. Long-term bonding efficacy of immediate dentin sealing techniques. J Dent Res 2010;89:141.
• 14.   Stavridakis MM, Krejci I, Magne P. Immediate dentin sealing of onlay preparations: Thickness of pre-cured dentin bonding agent and effect of surface cleaning. Oper Dent 2005;30:747–757.
• 15.   Ribeiro JC, Coelho PG, Janal MN, Silva NR, Monteiro AJ, Fernandes CA. The influence of temporary cements on dental adhesive systems for luting cementation. J Dent 2011;39:255–262.
• 16.   Chaiyabutr Y, Kois JC. The effects of tooth preparation cleansing protocols on the bond strength of self-adhesive resin luting cement to contaminated dentin. Oper Dent 2008;33:556–563.
• 17.   Kim S, Edwall L, Trowbridge H, Chien S. Effects of local anesthetics on pulpal blood flow in dogs. J Dent Res 1984;63:650–652.
• 18.   Perdigao J. Dentin bonding-variables related to the clinical situation and the substrate treatment. Dent Mater 2010;26:e24–e37.
• 19.   Mazzoni A, Pashley DH, Nishitani Y, et al. Reactivation of inactivated endogenous proteolytic activities in phosphoric acid-etched dentine by etch-and-rinse adhesives. Biomaterials 2006;27:4470–4476.
• 20.   Carrilho MR, Geraldeli S, Tay F, et al. In vivo preservation of the hybrid layer by chlorhexidine. J Dent Res 2007;86:529–533.
• 21.   Hebling J, Pashley DH, Tjaderhane L, Tay FR. Chlorhexidine arrests subclinical degradation of dentin hybrid layers in vivo. J Dent Res 2005;84:741–746.
• 22.   Hiraishi N, Yiu CK, King NM, Tay FR. Effect of 2% chlorhexidine on dentin microtensile bond strengths and nanoleakage of luting cements. J Dent 2009;37:440–448.
• 23.   King NM, Tay FR, Pashley DH, et al. Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application. Am J Dent 2005;18:126–134.
• 24.   Reis A, Albuquerque M, Pegoraro M, et al. Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin? J Dent 2008;36:309– 315.
• 25.   Chieffi N, Chersoni S, Papacchini F, et al. The effect of application sustained seating pressure on adhesive luting procedure. Dent Mater 2007;23:159–164.

Data Sharing Statement

Funding